First, the overall requirements
 1, fabrics, accessories quality excellent, in line with the requirements of customers, most customers receive confirmation or certification body the authority of the inspection report; 2, style color accurate size within the allowed range of error; 4, excellent workmanship; 5, clean, clean, look good; 6, packaging beautiful, ratio is correct, carton size suitable, suitable for long-distance transportation.
 Two, fabric (GORE-TEX, EVENT, new security, polyester2L, TORAY can be degraded green fabric, etc.)
 1, if the customer does not have special requirements, the general requirements of the color fastness to at least:
 (1) colour fastness to washing:
 A, single wash fastness (Colourchange) 3-4 grade
 B, color fastness (Colourstain) 3-4 grade
 (2) colour fastness to rubbing:
 A, dry wipe (Dry) 3-4 level
 B, wet wipe (Wet) 2.5-4 level
 (3) light color fastness: 4
 2, color accuracy, color and color of the color of the color of the color of the color should be at least within 3.5, and be confirmed by the customer.
 3 color, the surface cloth and the lining cloth of the same color, is not less than 3.5.
 4, fabric required accuracy ratio of ingredients, uniform density of yarn, woven fabrics to meet the requirements of the guests density and knitted fabrics require gram weight error range within + 5%.
 5, dimensions changes. If there is no specific provisions, required for all fabrics should be controlled in: 5 conventional after washing, in each direction. The maximum error is less than 3%; three times after dry cleaning, each direction maximum error is less than 2%.
 6, flame retardant, for pure man-made fiber fabrics can free measurement, plant fiber fabric must be tested; 16 micron flame contact 2 x 6 inches of fabric 1 second, calculation of the burning time, more than 7 seconds delay combustion can accept, in less than 7 seconds is unqualified.
 7, export orders of materials are required not containing azo dyes to the plant individually or phased test according to order requirement.
 Three, accessories (YKK, FLEECE, Dutx-Flex, etc.)
 1, metal buckle and corns shall not use the iron, all metal parts does not contain nickel, plastic fittings not containing cadmium.
 2, woven label, jacquard ribbon, requires a clear pattern, trimming neat, not fagoting.
 3, the printing requirements clear, is not the end, no degumming.
 4, paint products, solid, no damage.
 5, elastic band, elastic rope is good.
 Four, style
 Strictly according to customers like clothing or styles check all the details (this work by the clerk in prenatal samples), the clerk should ask the technical department or the factory before production of goods to all the color group prenatal samples delivered to the factory batch rear can produce.
 Five, appearance requirements
 1, fly straight and smooth, the length of the agreement. Before the pumping flat, uniform thickness, longer than the front lapel. There should be smooth, uniform zipper lips do not wrinkle, not open. Zipper. The buttons are straight and uniform, and the spacing is equal.
 2, stop the Silk Road straight, not anti vomiting, about the width is consistent (special requirements except).
 3, when the straight, without stirring huo.
 4, pocket founder, plain clothes, bag not gap.
 5, bag cover, bag is plain clothes, height, size, and. Pocket height, uniform size, smooth Fang Zheng.
 6, collar harelip with the same size and barge head of Pingsheng, at both ends of the neat, neckline circular smooth, surface smooth, elastic fit, collar mouth straight no warped bottom collar is not exposed.
 7, flat shoulder, shoulder seam straight, shoulder width consistent two. The seam gap symmetry.
 8, sleeve length, cuff size, width, height, length and width of line tripping sleeve.
 9, back flat, straight seam position, after the belt level symmetry, elastic fit.
 10, bottom round, smooth, elastic rib, rib width is consistent, to the fringe car.
 11, the size of each part of the material, length should be suitable for the fabric, not hanging, not spit inside.
 12, the car in the clothes outside on both sides of the jacquard ribbon, jacquard belt, on both sides of the symmetrical pattern.
 13, filling wire flat, uniform, tidy line, before and after the sheet joint alignment.
 14, the fabric is cashmere (hair), to the direction, cashmere (hair) should be the same to the backward.
 15, heat seal smooth, wrinkle and firm adhesion.
 16 and the fabric is coated with glue, the pinhole can not have glue exudation, car suture to wet oil line (the best way is with a small piece of cotton pad wet good oil line and clip in machine of line hole, let the line slip from the cotton inside).
 17, if the seal from the sleeve style, sealing length can not exceed 8CM, sealing the same, firm and tidy.
 18, the requirements of the stripes, the grid of the fabric, the stripes on the right.
 Six, size:
 If no special provisions, clothing flat on the table under the natural state of the metric, allowing the error range in accordance with the requirements of the garment fabric required by the factory:
 Note: if the production before the discovery of a larger error, to all the way to improve, so that the scope of error to minimize.
 Seven, packaging (according to customer requirements, and must pay attention to the following points)
 1, lint, clean up the stains,
 2, clothes seam to ironing clothes, not very hot mark, after ironing should be cleared to steam into the bag
 3, if there is water, wipe wipe clothes, clothes to dry before entering the bag.
 4, cotton fabric and clothes to copy paper, clothes printing printing and copying paper.
 5, according to the specified location to hang tags, stickers and paste designated by location.
 6, plastic bags shall not be damaged.
 7, the correct ratio, not mixed, a..;
8, carton sealing to add pad, to prevent the out of the box cut clothes (if within the box, plate to the inner pad box, and the pad is not outside the box in the allotment of pad